Here you see the cap with the SS wing nuts in place. Now to wrap off the plates and leads to prevent leakage of electricity which would affect performance. If we do our job right here the electrons all will be forced to travel only between the electrode plates giving us more gas output. It's hard to see here, but I've put some vinyl around the 10-32 bolts connecting the outside or positive plates together and used a nylon tie strap to hold it all in place. I use nylon instead of plastic tie straps because I've noticed the plastic ones tend to become brittle and deteriorate quickly inside one of these units. Notice the wrapped magnet assembly in place.

Previous Picture

Next Picture