This picture is somewhat over exposed but you can see from this side view the fitting at the top where the gas will exit this unit. Notice the unit is higher on the end with the fitting so the gas will collect there. There is a small nylon "T" in the line at the top that connects the inspection tube that connects to the brass "T" on the bottom. This tube will show the water level. This way I can check to see if I need to add distilled water without having to open the unit. The clear tube from the other side of the nylon "T" goes to a check valve (black with a short black tube), for safety reasons. Also you can see a black square object next to the check valve. This is the 30 amp relay that will be activated by a manual switch located near the driver's seat. Using the relay I can take electrical power directly from the battery also located under the back seat, and not have the electrical power go to the switch and back.

Previous Picture

Next Picture